Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Solid-Solutions-Group-Navigation Javelin-Group-Navigation Solid-Print-Group-Navigation 3DPRINTUK-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Advanced-Manufacturing-Group-Navigation Trimech-Staffing-Solutions-Group-Navigation
With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.
x
Search

How to Mate Ball and Socket Joints in SOLIDWORKS

Wednesday June 8, 2022 at 11:00am
Ball and socket joints have a wide variety of uses in several applications because of the degrees of freedom they possess. For this reason, they are often created within SOLIDWORKS as part of assemblies, but sadly there is no dedicated mate type for this within the software.

Ball joints therefore appear difficult to mate to begin with, at least whilst maintaining the full degrees of freedom. At first, adding a tangency mate between the ball surface the pocket edge seems like a sensible method, however when trying to achieve the fluid movement ball joints possess, the ball can ‘pop out’ of the socket similar to the instance below. This is a limitation of the tangent mate; if the tangency remains at a minimum of one point, the mate is still satisfied.

Another method you might try would be to add a concentric mate between the ball face and the pocket face; however, this can lead into some limitations down the line, causing the mate rotation to become locked.

The best practice to mate a ball to a socket, is to find a way to mate the centre of the socket to the centre of the ball coincidently. So, how exactly do we achieve this? The simplest method is to have good design intent and design the ball and socket to be centred around the origin. This makes life simple down the line, as you can just add a coincident relation between the two origin points. It is important to untick ‘Align axes’ checkbox when mating the origin points, otherwise there will be no rotation.

Often however, it is either not possible to have an origin at the centre of the parts in question (e.g. when using imported geometry), or it could be too late in the design process. In this instance, we need to create a sketch point that can be used in the mate instead. The first step we need to do is create a plane in the centre of the ball section. We can make use of temporary axes for this, as they populate at the centre of every cylindrical and conical face. To make the temporary axes visible, simply select the option from the heads-up view toolbar. Together the temporary axis and a perpendicular plane can be used as references for a new plane that intersects through the centre of the ball.

To create a sketch point, it is easiest to first use our new plane to intersect the ball and create a line down the centre. This can be achieved by ‘Split Line’ and selecting ‘Intersection’ for the split type and selecting the plane and ball face in respective selection boxes.

The intersection line can be used in a new sketch on our intersecting plane to convert its entities. Once converted, the sketch should change to construction geometry, leaving a central point that can be used to mate to a socket.

For the socket, the method is similar however it is normally much easier to create a plane that intersects the centre. In this instance, the two flat edges were used to create a midplane. On this plane, one of the circular edges can have its entities converted and changed to construction geometry.

Now that we have two central sketch points, we can mate these coincidently to achieve the full range of movement expected from a ball and socket joint.

See video for full range of motion

Related Blog Posts

ANTOBOT: Empowering Sustainable Agriculture with A
Antobot’s colony of robot ants are on a mission to reshape the future of agriculture through the innovative combination of AI & practical technology.
CFD Simulation: Validating SOLIDWORKS Flow Simulat
How reliable is SOLIDWORKS Flow Simulation for Thermal Analysis? The results will surprise you!
What is a Registry Reset? How to Reset SOLIDWORKS
A registry reset will affect your menus, toolbars, custom shortcuts, and file locations, and set them back to the default SOLIDWORKS settings.

 Solid Solutions | Trimech Group

MENU
Top