Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Trimech-Main-Site-Group-Navigation Solid-Solutions-Group-Navigation Javelin-Group-Navigation Solid-Print-Group-Navigation 3DPRINTUK-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Enterprise-Solutions-Group-Navigation Trimech-Advanced-Manufacturing-Group-Navigation Trimech-Staffing-Solutions-Group-Navigation
With over 35 years of experience, the TriMech Group offers a comprehensive range of design, engineering, staffing and manufacturing solutions backed by experience and expertise that is unrivalled in the industry. The TriMech Group's solutions are delivered by the divisions and brands shown here, use the links above to visit the group's websites and learn more.
x
Search

Confusing Configurations?

Wednesday March 29, 2017 at 3:26pm
Applications Engineer, Rory Niles takes us through his latest blog 'Confusing Configurations' in an effort to help save you time whilst configuring your parts.

Confusing Configurations?

If you do a range of similar products, you will know that configurations of your parts will save you a whole lot of work on a daily basis, but once you have started putting these parts into assemblies it can get confusing. Basically, the possibilities all multiply, as does the potential for selecting and changing the wrong thing…


Here we have a “Bracket” part with some configurations in it: -


Configuration Examples

 

This has been used in an assembly (that may be vaguely familiar to many of you), and as you can see from the picture, I have created some configurations in that top level assembly called “Basic,” “Bench Mount” and “Back Plate Mount,” and I have just selected the Bracket on screen and used the drop down list to swap the configuration of the part that is used in each configuration of the assembly: -


Configuration Example

 

That to me is the simplest way of doing it – and that’s what I’m after here. I also have some other parts with configurations, the “Crank arm”: - 


Short Medium Long Configuration Examples


And the “Knob”: -


Plain Finger Grips Ridges Configuration Example


I have fitted these together in another assembly, called “crank sub”, I then created configurations of this assembly, and I just used the drop down selection list to swap the configurations of the parts that the assembly configurations use: -


Crank Sub Assembly

So now my “crank sub” assembly has these combinations: -


Short Crank, Medium Crank, Long Crank Configuration Examples


Great, so far so good.

It is when the “crank sub” is put in the top level assembly “Universal Joint” that there is the potential for confusion!

I want a range of Universal Joints with different cranks, the important thing to note is that it makes a big difference where you select things!

You really don’t want to select parts that are inside the sub assembly from the graphics area of the screen when looking at the main assembly, and switch their configurations from the drop-down list – like this: -


Crank Sub


By selecting that part on screen I would be changing the configuration of the part that is being used by the currently selected configuration of the sub assembly!

In other words I would be in effect editing the sub assembly, and I could get something like this if I was to go ahead: - 

 

Short Crank, Medium Crank, Long Crank, Configurations

Which is not what I want at all!

What I should do from the main assembly (once I have corrected the configurations in the sub assembly!) is select the name of the sub assembly from the design tree: - 

 

Configurations, SOLIDWORKS

 

Then I am selecting the existing configurations of the sub assembly that the main assembly will use – then I can get my full range of different machines: -

 

Configurations, SOLIDWORKS, Crank Sub

 

So this is how it breaks down: - 

 

Back Plate Mount, SOLIDWORKS, Configurations

If in any doubt open up each level (part/sub assembly/top level assembly) and follow it through…

And if you want to change what configuration of your sub assembly is being used by your main assembly select its name from the tree!

 

I hope that helps!   Rory Niles.

 

Related Blog Posts

What is a Registry Reset? How to Reset SOLIDWORKS
A registry reset will affect your menus, toolbars, custom shortcuts, and file locations, and set them back to the default SOLIDWORKS settings.
How to Export Bodies from Parts to Assemblies
Bodies in multibody parts can be converted into individual part files easily with the Save Bodies command in SOLIDWORKS.
SOLIDWORKS for Fabrication: What is a K-Factor?
Let’s explore what bend allowances and K-Factors are, and show you how they apply in fabricating sheet metal with SOLIDWORKS.

 Solid Solutions | Trimech Group

MENU
Top